Escape Free Easy Fit Plus

The harness boasts a triple-layer construction crafted for durability and comfort:

• Scratch-resistant outer layer
• Neoprene inner layer
• Moisture-wicking chest plate
  

Additionally, a reinforced full-body nylon strap is sandwiched between the inner and outer layers to enhance durability, security, and safety.

The Escape Free Easy Fit Plus Harness is equipped with the Escape Free Functionality, a tightening mechanism that allows the harness to hug the dog's body whenever the leash is pulled or activated.

This feature is meant to discourage the dog from pulling or escaping from the harness. It also provides a snug and secure fit that can help prevent the harness from slipping or twisting.

When the mechanism is activated, it tightens and reduces the space around your dog's back and hugs them tightly.

This prevents your dog from slipping out when they attempt to back out.

Therefore providing a comfortable and safe experience for both the dog and the owner.

We've written two extensive blogs on this. Please click on the following topics to learn more.

1. Why do dogs escape out of their harnesses?
2.The origin of Gooby's Escape Free Harnesses.

Please follow these steps:

1. Loosen all of the straps on the harness.
2. Place the harness on the ground, with the side that has the Gooby logo facing up.
3. Have your dog step into the two openings of the harness with their front legs.
4. Pull the harness up and over your dog's back and securely fasten the buckle.
5. To ensure a proper fit, adjust the rubber adjusters to the desired opening of about 1 finger's width of space between the back of the dog and the harness.
6. Make sure to periodically check the fit of the harness and adjust as necessary to ensure your dog's comfort and safety. Also, ensure that the D-rings for attaching the leash is securely fastened to prevent your dog from escaping.

Measure around the widest part of your dog's chest, just behind the front legs. See: How do I measure my dog?

For sizing guidance, you can also reach out to one of our customer advocates and we would be happy to assist.

You can reach us in any of the following ways.
1. Live Chat 💬 (click on chat icon on the bottom right corner of your browser)
2. Email 📧 [email protected]
3. SMS 💬 213.214.0175
4. Phone 📞 888.445.8011

It's designed to fit a variety of small to medium dog breeds, but it may not be suitable for all dogs (i.e. large breeds like Labradors.)

Please measure your dog's chest girth to determine which size is best for your dog.

You can also reach out to one of our customer advocates and we would be happy to assist.

You can reach us in any of the following ways.

1. Live Chat 💬 (click on chat icon on the bottom right corner of your browser)
2. Email 📧 [email protected]
3. SMS 💬 213.214.0175
4. Phone 📞 888.445.8011

We've had feedbacks from our community that the tightening feature of the harness when it’s pulled makes it potentially useful during training.

However, we did not design this for training purposes. It was designed for dogs that have a tendency to pull by backing up.

We're constantly amazed from the feedbacks of our community.

Yes, it is machine washable.

We recommend the following:

- using a gentle cycle with mild detergent and cold water
- rinse the harness thoroughly before air drying it.

No. The sizing charts for the Escape Free Easy Fit and the Escape Free Easy Fit Plus harnesses are not the same.

The Easy Fit Plus tends to run smaller compared to the Easy Fit.

Please refer to the respective sizing chart for each model to ensure that your pet gets the most comfortable and secure fit possible.

Yes, it's suitable for normal outdoor activities such as walking, hiking, and running.

All Gooby Escape Free harnesses has a patented design that can significantly reduce or even eliminate the risk of a dog escaping, particularly dogs that have a tendency to pull by backing up.

Couple important reminders:

1. No harness can prevent escape 100% of the time. This is especially true when the fit is incorrect.
2. The tightening mechanism (i.e. the Escape Free Functionality) is only activated when the leash is pulled. When there's no active pulling involved, the mechanism loosens. This is to ensure your pup is comfortable or else the harness would be tight around their body at all times, making your pup uncomfortable.

Use the adjustment tabs on the straps to customize the space between the buckle/clip and your dog's back, as well as how wide the harness opens.

Move the tabs closer to the buckle if you want to tighten the harness, and adjust them towards the D-rings for a looser fit.

For best fit, the harness should fit in a way so that there is about 1 finger's width of space between the back of the dog and the harness.

All Escape Free harnesses are equipped with the same escape free functionality, but their level of comfort and adjustability differs.

While the Escape Free Easy Fit Plus and Easy Fit are both lightweight, they differ on the material. The Sport and Memory Foam harnesses have greater adjustability due to the presence of 4-point adjusters.

Meanwhile, the Escape Free Comfort X One stands out as the only head-in harness in the series.

Therefore, we do not advise connecting any of our harnesses to any restraint systems. Any misuse of our harnesses can potentially result in product failure and/or even injury to your dog.

While the Escape Free Easy Fit Plus Harness can be used inside the car, it is not expected to function as a dog car harness.

Currently, there is no Gooby harness that is designed or rated for vehicle restraint systems. See:Traveling Information with Gooby

No, we do not.

We do have warranty on our products which covers items 1 year from date of purchase due to manufacturing defects. See: My item is defective. What is your warranty policy?

Yes.

It features two rubber adjusters on the straps to provide a customized fit for your dog.